tional flags for ftp-proxy (8) _enable=«NO» # Expose pf state to other hosts for syncing_syncdev=«» # Interface for pfsync to work through_syncpeer=« ; »# IP address of pfsync peer host_ifconfig =« »# Additional options to ifconfig (8) for pfsync_extensions =« YES »# Set to NO to turn off RFC1323 extensions._in_vain =« 0 »#>= 1 to log connects to ports w / o listeners._keepalive=«YES» # Enable stale TCP connection timeout (or NO). _drop_synfin=«NO» # Set to YES to drop TCP packets with SYN + FIN
# NOTE: this violates the TCP specification_drop_redirect=«NO» # Set to YES to ignore ICMP REDIRECT packets_log_redirect=«NO» # Set to YES to log ICMP REDIRECT packets_interfaces=«auto» # List of network interfaces (or «auto»). _interfaces=«» # List of cloned network interfaces to create.
# cloned_interfaces=«gif0 gif1 gif2 gif3» # Pre-cloning GENERIC config._lo0=«inet 127.0.0.1» # default loopback device configuration._em0=«DHCP» _em1=«inet 192.168.100.1 netmask 255.255.255.0»
# ifconfig_lo0_alias0=«inet 127.0.0.254 netmask 0xffffffff» # Sample alias entry.
# ifconfig_ed0_ipx=«ipx 0x00010010» # Sample IPX address family entry.
# ifconfig_fxp0_name=«net0» # Change interface name from fxp0 to net0.
# vlans_fxp0=«101 vlan0» # vlan (4) interfaces for fxp0 device
# create_args_vlan0=«vlan 102» # vlan tag for vlan0 device
# wlans_ath0=«wlan0» # wlan (4) interfaces for ath0 device
# wlandebug_wlan0=«scan + auth + assoc» # Set debug flags with wlanddebug (8)
# ipv4_addrs_fxp0=«192.168.0.1/24 192.168.1.1-5/28» # Example IPv4 address entry.
#
# autobridge_interfaces=«bridge0» # List of bridges to check
# autobridge_bridge0=«tap * vlan0» # Interface glob to automatically add to the bridge
#
# If you have any sppp (4) interfaces above, you might also want to set
# the following parameters. Refer to spppcontrol (8) for their meaning._interfaces=«» # List of sppp interfaces.
# sppp_interfaces=«.0» # example: sppp over.
# spppconfig_.0=«authproto=chap myauthname=foo myauthsecret =« top secret » hisauthname=some-gw hisauthsecret=«another secret» »_interfaces =« »# List of GIF tunnels.
# gif_interfaces=«gif0 gif1» # Examples typically for a router.
# Choose correct tunnel addrs.
# gifconfig_gif0=«10.1.1.1 10.1.2.1» # Examples typically for a router.
# gifconfig_gif1=«10.1.1.2 10.1.2.2» # Examples typically for a router._interfaces=«» # List of Fast EtherChannels.
# fec_interfaces=«fec0 fec1»
# fecconfig_fec0=«fxp0 dc0» # Examples typically for two NICs
# fecconfig_fec1=«em0 em1 bge0 bge1» # Examples typically for four NICs
# User ppp configuration._enable=«NO» # Start user-ppp (or NO). _program=«/ usr / sbin / ppp» # Path to user-ppp program._mode= «auto» # Choice of «auto», «ddial», «direct» or «dedicated».
# For details see man page for ppp (8). Default is auto...
