# to enable 6to4 interface._interface_ipv4plen=«0» # Prefix length for 6to4 IPv4 addr,
# to limit peer addr range. Effective value
# is 0-31._interface_ipv6_ifid=«0: 0: 0: 1» # IPv6 interface id for stf0.
# If you like, you can set «AUTO» for this._interface_ipv6_slaid=«0000» # IPv6 Site Level Aggregator for stf0_faith_prefix=«NO» # Set faith prefix to enable a FAITH
# IPv6-to-IPv4 TCP translator. You also need
# faithd (8) setup._ipv4mapping=«NO» # Set to «YES» to enable IPv4 mapped IPv6 addr
# communication. (Like :: ffff: abc d) _ipfilter_rules=«/ etc/ipf6les» # rules definition file for ipfilter,
# see / usr / src / contrib / ipfilter / rules
# for examplesaddrctl_enable=«YES» # Set to YES to enable default address selectionaddrctl_verbose=«NO» # Set to YES to enable verbose configuration messages
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # System console options # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #=«» # keyboard device to use (default / dev/kbd0).=«NO» # keymap in / usr / share / syscons / keymaps / * (or NO).=«NO» # keyboard rate to: slow, normal, fast (or NO).=«NO» # See kbdcontrol (1) for options. Use «off» to disable.=«NO» # function keys default values ??(or NO).=«NO» # cursor type {normal | blink | destructive} (or NO).=«NO» # screen map in / usr / share / syscons / scrnmaps / * (or NO). x16=«NO» # font 8x16 from / usr / share / syscons / fonts / * (or NO). x14=«NO» # font 8x14 from / usr / share / syscons / fonts / * (or NO). x8=«NO» # font 8x8 from / usr / share / syscons / fonts / * (or NO).=«300» # blank time (in seconds) or «NO» to turn it off.=«NO» # screen saver: Uses / boot / kernel / $ {saver} _saver. ko_nondefault_enable=«YES» # Treat non-default mice as enabled unless
# specifically overriden in rc. conf (5). _enable=«NO» # Run the mouse daemon._type=«auto» # See man page for rc. conf (5) for available settings._port=«/ dev/psm0» # Set to your mouse port._flags=«» # Any additional flags to moused._start=«NO» # if 0xd0-0xd3 default range is occupied in your
# language code table, specify alternative range
# start like mousechar_start=3, see vidcontrol (1) _flags=«» # Set this vidcontrol mode for all virtual screens_kbdflags=«» # Set this kbdcontrol mode for all virtual screens
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # Mail Transfer Agent (MTA) options # # # # # # # # # # # # # # # # # # # # # #
#############################################################_start_script=«/etc/rc. sendmail »
# Script to start your chosen MTA, called by / etc / rc.
# Settings for / etc / rc. sendmail and / etc / rc. d / sendmail: _enable=«NO» # Run the sendmail inbound daemon (YES / N...
