er
# rfcomm_pppd_server_two_register_dun=«NO» # for «two» _enable=«NO» # Switch an USB BT controller present on
# ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
# ubthidhci_addr=«2» # Check usbconfig list to find the correct
# numbers for your system.
# # # Miscellaneous network options: # # # _bmcastecho=«NO» # respond to broadcast ping packets
# # # IPv6 options: # # # _enable=«NO» # Set to YES to set up for IPv6._network_interfaces=«auto» # List of network interfaces (or «auto» ). _defaultrouter=«NO» # Set to IPv6 default gateway (or NO).
# ipv6_defaultrouter=«2002: c058: 6301 ::» # Use this for 6to4 (RFC 3068) _static_routes=«» # Set to static route list (or leave empty).
# ipv6_static_routes=«xxx» # An example to set fec0: 0000: 0000: 0006 :: / 64
# route toward loopback interface.
# ipv6_route_xxx=«fec0: 0000: 0000: 0006 :: - prefixlen 64 :: 1» _gateway_enable=«NO» # Set to YES if this host will be a gateway._router_enable=« ; NO »# Set to YES to enable an IPv6 routing daemon._router =« / usr/sbin/route6d »# Name of IPv6 routing daemon._router_flags =« »# Flags to IPv6 routing daemon.
# ipv6_router_flags=«-l» # Example for route6d with only IPv6 site local
# addrs.
# ipv6_router_flags=«-q» # If you want to run a routing daemon on an end
# node, you should stop advertisement.
# ipv6_network_interfaces=«ed0 ep0» # Examples for router
# or static configuration for end node.
# Choose correct prefix value.
# ipv6_prefix_ed0=«fec0: 0000: 0000: 0001 fec0: 0000: 0000: 0002» # Examples for rtr.
# ipv6_prefix_ep0=«fec0: 0000: 0000: 0003 fec0: 0000: 0000: 0004» # Examples for rtr.
# ipv6_ifconfig_ed0=«fec0: 0: 0: 5 :: 1 prefixlen 64» # Sample manual assign entry
# ipv6_ifconfig_ed0_alias0=«fec0: 0: 0: 5 :: 2 prefixlen 64» # Sample alias entry._default_interface=«NO» # Default output interface for scoped addrs.
# Now this works only for IPv6 link local
# multicast addrs._flags=«» # Flags to IPv6 router solicitation._enable=«NO» # Set to YES to enable an IPv6 router
# solicitation daemon._flags=«-a» # Flags to an IPv6 router solicitation
# daemon._enable=«NO» # Set to YES to enable an IPv6 router
# advertisement daemon. If set to YES,
# this router becomes a possible candidate
# IPv6 default router for local subnets._interfaces=«» # Interfaces rtadvd sends RA packets.d_enable=«NO» # Do IPv6 multicast routing.d_program=«/ usr / local / sbin/pim6dd »# Name of IPv6 multicast
# routing daemon. You need to
# install it from package or
# port.d_flags=«» # Flags to IPv6 multicast routing daemon._interface_ipv4addr=«» # Local IPv4 addr for 6to4 IPv6 over IPv4
# tunneling interface. Specify this entry
...
