tand the security implications of running SNMP v1/v2
# in your network._enable=«NO» # Run the SNMP daemon (or NO). _flags=«» # Flags for bsnmpd.
# # # Network routing options: # # #=«NO» # Set to default gateway (or NO). _arp_pairs=«» # Set to static ARP list (or leave empty) . _routes=«» # Set to static route list (or leave empty). _static_routes=«» # Set to static route list for NATM (or leave empty). _enable=«YES» # Set to YES if this host will be a gateway._enable=«NO» # Set to YES to enable a routing daemon.=«/ sbin / routed» # Name of routing daemon to use if enabled._flags=«-q» # Flags for routing daemon._enable=«NO» # Do IPv4 multicast routing._program=«/ usr / local / sbin / mrouted» # Name of IPv4 multicast
# routing daemon. You need to
# install it from package or
# port._flags=«» # Flags for multicast routing daemon._enable=«NO» # Set to YES to enable IPX routing._enable=«NO» # Set to YES to run the IPX routing daemon._flags=«» # Flags for IPX routing daemon._all=«NO» # replaces obsolete kernel option ARP_PROXYALL._sourceroute=«NO» # do source routing (only if gateway_enable is set to « ; YES ») _sourceroute =« NO »# accept source routed packets to us
# # # ATM interface options: # # # _enable=«NO» # Configure ATM interfaces (or NO).
# atm_netif_hea0=«atm 1» # Network interfaces for physical interface.
# atm_sigmgr_hea0=«uni31» # Signalling manager for physical interface.
# atm_prefix_hea0=«ILMI» # NSAP prefix (UNI interfaces only) (or ILMI).
# atm_macaddr_hea0=«NO» # Override physical MAC address (or NO).
# atm_arpserver_atm0=«0x47.0005.80.999999.9999.9999.9999.999999999999.00» # ATMARP server address (or local).
# atm_scsparp_atm0=«NO» # Run SCSP / ATMARP on network interface (or NO). _pvcs=«» # Set to PVC list (or leave empty). _arps=«» ; # Set to permanent ARP list (or leave empty).
# # # Bluetooth # # # _enable=«NO» # Enable hcsecd (8) (or NO) _config=«/ etc / bluetooth / hcsecd. conf » # Hcsecd (8) configuration file_enable=«NO» # Enable sdpd (8) (or NO) _control=«/ var / run / sdp» # sdpd (8) control socket_groupname=«nobody» # set spdp (8 ) user / group to run as after_username=«nobody» # it initializes_enable=«NO» # Enable bthidd (8) (or NO) _config=«/ etc / bluetooth / bthidd. conf » # Bthidd (8) configuration file_hids=«/ var / db / bthidd. hids » # Bthidd (8) known HID devices file_pppd_server_enable=«NO» # Enable rfcomm_pppd (8) in server mode (or NO) _pppd_server_profile=«one two» # Profile to use from / etc / ppp / ppp. conf
#
# rfcomm_pppd_server_one_bdaddr=«» # Override local bdaddr for «one» _pppd_server_one_channel=«1» # Override local channel for «one»
# rfcomm_pppd_server_one_register_sp=«NO» # Override SP and DUN register
# rfcomm_pppd_server_one_register_dun=«NO» # for «one»
#
# rfcomm_pppd_server_two_bdaddr=«» # Override local bdaddr for «two» _pppd_server_two_channel="3" # Override local channel for «two»
# rfcomm_pppd_server_two_register_sp=«NO» # Override SP and DUN regist...
